![]() It has overcurrent sense and protect, DC correction, DC power input and muting relay. The design topology is a fully discrete, fully complementary bi-polar, symmetrical current-feedback with a driver stage and Vbe multiplier, no caps in the signal path and a DC servo. Gain: -8dB, 0dB, or 14dB, selectable via rear switch Output Impedance: Less than 0.2 ohms at either gain Low Gain: Greater than 121dB, unweighted, ref to 2V RMS High Gain: Greater than 110dB, unweighted, ref to 2V RMS Low Gain: Less than -112dB ref 1V RMS, 300 ohms, CCIF High Gain: Less than -103dB ref 1V RMS, 300 ohms, CCIF Power specs are identical for the Magni 3+. Power specs are identical for the Heretic Version. Maximum Power, 600 ohms: 215mW RMS per channel Maximum Power, 300 ohms: 410mW RMS per channel Maximum Power, 50 ohms: 1.6W RMS per channel Maximum Power, 32 ohms: 2.4W RMS per channel Maximum Power, 16 ohms: 2.8W RMS per channel When you take the amp out, its like Whoa! Whats this. When you get the package, it looks like a typical Schiit shipping box. Only two screws on the back holding the case on which also hold the case to the RCA Jacks. A very nice "embossed" Schiit Logo on top. Very smooth matte silver grey to me finish. But its not like the silver color of previous Magni's.quite different. The unit I received was the discrete Magni 3+, not the Magni Heretec.Ĭolor was silver. I have had many Schiit products from the OG Asgard and OG Lyr and so many since then. This is a serious hobby for me and I just like sharing with the ride with the headphone public. Listen to different music at various quality levels. Having been around for many years I try to tell or share my "experience" with products. Thanks to Schiit for sending me this unit. I was sent the Magni + for a honest review. No noise, no scratchy stuff and the low level tracking with my ears was well very good. Also the unit I received worked flawlessly. To be fair I own "many" of them and this doesn't stop me from enjoying the heck out of them. This is the really only thing I dont like about small form factor devices. Yes a big RK 27 pot wont fit in the chassis.sorry. ![]() But a little pot lube and several rotations often fixes this issue if you experience it. I have sent back some amps for a pot replacement. Also low level tracking can also be an issue. They do work and thousands of them are out there in all kinds of gear, but every once in awhile they can get scratchy or nosiey one and you can detect the wiper action at times. Even though the pot is a "sorted" potentiometer, I never liked the small form factor pots (RK09 etc). Not in design, not in specs, not in the pot (hmmm.), not in parts quality, not in looks, not in a new chassis, not in safety, and not in manufacturing, USA suppliers, made in Corpus Christi, Texas. No Excuses! What! Schiit states in its description. ![]()
0 Comments
Leave a Reply. |